General Laser Level

We are a factory with 11 years of history. This general laser level is our all-purpose tool for professional craftsmen and DIY lovers. It uses balanced performance to meet daily construction needs like building, renovation, and measurement. The laser uses a 520nm green light. It is a Class II laser, safe for work. This green light is three times brighter than traditional red lasers in bright light. It works up to 25 meters indoors. With pulse mode on, it works outdoors as well. Its accuracy is ±3mm/10m. The line width stays under 2mm at 10 meters. Whether you are doing electrical work, tiling, or hanging pictures, this general laser level gives you a precise and reliable reference line.

This general laser level comes in three configurations to meet different levels of job complexity. The 2-line model (1V, 1H) has one horizontal line and one vertical line. The two lines are at a 90° angle. The fan angle is ≥110°. This is good for basic home renovation, picture hanging, and small furniture positioning. The 3-line model (2V, 1H) has one horizontal line, two vertical lines, and one lower plumb point. It has a ceiling cross intersection. This is good for home electrical work, door and window installation, and wall tiling. The 5-line model (4V, 1H) has one 360° horizontal line, four vertical lines, and one ceiling plumb point. It builds a spatial coordinate system. This is good for large commercial work, ceiling grid installation, and precision engineering.

The whole series uses a magnetic pendulum self-leveling system. The leveling range is between ±3.5° and ±4°. If the tool is out of range, it gives a sound and light alarm. The body is made of engineering plastic with a rubber coating. It has an IP54 rating for dust and water resistance. It can survive a 1-meter drop. It works in temperatures from -10℃ to 50℃. It handles humidity from 10% to 90% (non-condensing). It adapts to many different work environments. It has a standard 1/4-inch thread. You can attach it to many different tripods and mounting bases.

The power system uses a large 3000mAh rechargeable lithium battery. With all laser lines on, it runs for over 5 hours. You can also use it while it charges. The clear LED screen shows the remaining battery power. It gives a smart warning when the battery is low. This stops work from being interrupted. We also added some helpful features. You can control the lasers separately. It has 360° fine adjustment and a pulse mode. The standard package includes the main unit, battery, charger, portable storage case, simple magnetic base, and manual. This general laser level is an ideal tool for daily construction jobs.