Multi Line Lasers
Multi-Line Laser - Modules for Precision Alignment and Machine Vision Systems
Engineered for machine vision integration, high-precision industrial alignment, and automated inspection, our Multi-Line Laser Modules project uniform, highly visible optical reference patterns. By combining high-reliability semiconductor laser diodes with precision Powell lenses and diffractive optical elements (DOE), these modules eliminate beam edge roll-off and deliver consistent energy distribution along every line.
Whether your application requires parallel reference lines, 90-degree crosshairs, or multi-line optical grids, we provide custom OEM configurations tailored to your mechanical envelope, optical geometry, line width tolerance, and environmental requirements.
Key Advantages
Superior Line Uniformity and Edge Resolution
Unlike standard cylindrical optics that suffer from Gaussian brightness decay at the line ends, our modules utilize custom Powell optics and DOEs to ensure uniform optical power density (Line Uniformity greater than or equal to 85 percent). This provides sharp contrast for camera sensors and machine vision edge detection algorithms.
Precision Mechanical-to-Optical Axis Alignment
To prevent mounting calibration errors in automated machinery, every module is aligned with a Bore Sight Error tolerance of less than or equal to 0.5 degrees. This ensures that the projected optical line aligns precisely with the mechanical housing center axis, reducing assembly setup time for system integrators.
Integrated APC Driver Circuit and Thermal Management
Equipped with an integrated Automatic Power Control (APC) driver circuit and housed in anodized 6061-T6 aluminum or stainless steel, our modules suppress output power fluctuation caused by temperature changes (-10°C to +50°C operating range). This architecture delivers a Mean Time To Failure (MTTF) exceeding 10,000 continuous operating hours.
Technical Specifications
|
Parameter |
Specification and Custom Range |
Engineering Options |
|
Available Wavelengths |
405nm, 450nm, 520nm (Direct Green), 635nm, 650nm |
Wavelength selection based on ambient light and sensor quantum efficiency |
|
Laser Patterns |
2-Line, 3-Line, 5-Line, Crosshair, Multi-Line Grids |
Custom fan angles, line spacing, and optical projection patterns |
|
Output Power |
1mW to 100mW (Class 2, 2M, 3R, 3B Safety Options) |
Adjusted for eye safety compliance and sensor exposure requirements |
|
Line Uniformity |
Greater than or equal to 85 percent across entire line length |
Powell lens configuration eliminates faded beam edges |
|
Bore Sight Error |
Less than or equal to 0.5 degrees |
Optical axis pre-aligned to mechanical housing axis |
|
Working Distance |
50mm to 5,000mm plus |
Focused or collimated per target distance requirements |
|
Line Width |
Customized per focus distance (e.g., less than 0.5mm at 500mm) |
Fixed focus or adjustable focus mechanisms available |
|
Operating Voltage |
3V, 5V, 12V, 24V DC |
Integrated reverse polarity and ESD protection circuit |
|
Housing Material |
Anodized 6061-T6 Aluminum, Brass, or Stainless Steel |
Standard 12mm, 16mm, 20mm outer diameter or custom CNC dimensions |
|
Electrical Interface |
JST, Molex, Shielded Cable, Flying Leads |
Customized wire length and strain relief boots |
|
Compliance Standards |
IEC 60825-1, CE, RoHS, FDA Accession Compliant |
Complete batch compliance test reports provided |
Built for Demanding Industrial Applications

Machine Vision and 3D Profiling
Projects structured light reference patterns for automated edge detection, surface flatness inspection, dimensional measurement, and height profiling.

Industrial Alignment and Calibration
Provides visible alignment guide lines for tire manufacturing, timber and stone cutting machinery, printing press positioning, and industrial assembly lines.

Robotics and Automated Guided Vehicles (AGVs)
Delivers precise optical positioning references for robotic pick-and-place end-effectors, visual positioning sensors, and automated material handling.
OEM Customization Process
We provide a streamlined engineering path from initial prototype to volume production:
Requirement Analysis
You share your optical target (wavelength, power, line pattern, fan angle, line width, working distance, and mechanical space).
Optical Simulation and Prototyping
Our optical team conducts beam trace simulations and builds custom prototypes within 3 to 5 business days.
Quality Assurance and Certification
Every production lot undergoes 100 percent inspection for power stability, line straightness, beam uniformity, and safety compliance (IEC 60825-1, CE, RoHS, FDA).
Quality Control and Verification Standards
|
Inspection Item |
Testing Methodology |
Quality Goal |
|
Optical Power Output |
Integrating Sphere and Power Meter Testing |
Power tolerance within plus or minus 5 percent |
|
Wavelength Accuracy |
Optical Spectrometer Measurement |
Wavelength drift within plus or minus 3nm |
|
Line Uniformity and Profile |
Spatial Beam Profiler Analysis |
Line intensity uniformity greater than or equal to 85 percent |
|
Optical Axis Tilt |
Automated Bore Sight Alignment Fixture |
Tilt error less than or equal to 0.5 degrees |
|
Burn-In Aging Test |
24 to 48 Hours Continuous Thermal Stress Test |
Zero early failure rate under maximum operating temperature |
FAQ
Request Your Custom Multi-Line Laser Solution Today
Whether you require a standard configuration or a full custom OEM housing and optical design, our engineering team is ready to assist.
Contact our technical sales team today to receive a technical recommendation, 3D CAD file, and competitive quote.
[ Get a Free Technical Consultation & Quote ]
[ Email Our Optics Engineering Team ]
As one of the most professional multi line lasers manufacturers in China, we're featured by quality products and low price. Please rest assured to wholesale bulk discount multi line lasers in stock here from our factory. We also accept customized orders.












