Multi Laser Level

We have been a factory for 11 years. This multi laser level has an ultra-strong configuration of 235 laser lines. It redefines the performance limits of laser measurement tools. The laser uses a 520nm green light. It is a Class II laser, safe for work. This green light is three times brighter than traditional red lasers in bright light. Its indoor working range is 40 meters. With pulse mode on, it works up to 30 meters outdoors. Its accuracy reaches an extreme level of ±0.08mm/m. The line width stays under 1.0mm at 10 meters. Whether you are doing precision engineering, bridge and tunnel work, or large venue renovation, this multi laser level gives you an accurate reference that meets the strictest project standards.

This multi laser level uses a third-generation dual-axis magnetic gravity compensation self-leveling system. Its leveling range is ±5°. The leveling accuracy reaches 0.005°. The response time is under 2 seconds. If the tool is tilted too far, the laser locks and gives sound and light alarms. This ensures you get the most reliable reference every time you turn it on. It also supports manual lock mode. This allows for precise angled projections. The laser system uses a powerful LD green light source. Its output power is ≥8mW. In bright mode, the visible range increases by 50%. Even under the midday sun, this green line stays clear.

Extreme work environments demand a lot from tools. So, we made this multi laser level with a military-grade body. Its protection rating is IP67. It can survive a 2-meter drop. It works in temperatures from -25℃ to 55℃. It handles humidity from 10% to 95% (non-condensing). Whether it is freezing cold, hot sun, wind, or rain, it runs smoothly. The body uses aviation-grade aluminum and high-strength engineering plastic. The structure is very solid. It weighs about 1.6kg. It has a 5/8-inch standard thread. It also comes with a quick-release mounting base. This meets all your job site needs.

This multi laser level comes with a wireless remote. You can operate it from up to 20 meters away. It also has a touch panel. You can control laser lines separately. This makes it easy to use. The power system uses a high-capacity dual battery set. The total capacity is 10000mAh. With all laser lines on, it runs for over 15 hours. It supports fast parallel charging. The clear LED screen shows the remaining battery power. It gives a percentage and a three-level indicator. It gives a smart warning when the battery is low. This stops work from being interrupted. The standard package includes the main unit, dual lithium batteries, charger, wireless remote, wall bracket, and portable storage case. You can calibrate it every 3 months. The calibration data saves automatically.